KFU. Card publication. Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth

KAZAN
FEDERAL UNIVERSITY

- RUS
- 中文
- ES

IMPROVED DESIGN OF A WORM TYPE INSTRUMENT FOR FINAL MACHINING OF EVOLVENT GEAR TEETH

Form of presentation

Articles in international journals and collections

Year of publication

2017

��

��

Authors, employees of KFU

Golovko Aleksandr Nikolaevich, author

Kondrashov Aleksey Gennadevich, author

Bibliographic description in the original language

Golovko A.N, Kondrashov A.G, Yurasov S.Yu., Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth//Procedia Engineering. - 2017. - Vol.206, Is.. - P.1333-1336.

Annotation

In connection with the absence of possibility to process gear-wheels with large allowance at machining of disk shavers (for example, after the preliminary rolling-up of points), N.V. Smorkalov et al. have worked out the construction of a worm type instrument with a continuous spiral cutting edge. The limitations of this construction were unfavorable terms of cutting wedge work for lack of the structurally executed rake which resulted in the subzero treatment productivity. For simplification of the procedure, regrinding of this instrument and minimization of the nascent “organic” error at regrinding on the outward cylindrical surface, a decision was made to bring in the instrument construction developed by N.V. Smorkalov et al. of positive rake γ, form a radius ditch and two antihunt ribbons breadthways l executed on an outward cylindrical surface.

Keywords

Worm type instrument, final machining, evolvent gear teeth

The name of the journal

Procedia Engineering

URL

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85035111965&doi=10.1016%2fj.proeng.2017.10.640&partnerID=40&md5=d354da0259eb8eb3a945f4003d2d5f55

Please use this ID to quote from or refer to the card

https://repository.kpfu.ru/eng/?p_id=169545&p_lang=2

Full metadata record

Field DC	Value	Language
dc.contributor.author	Golovko Aleksandr Nikolaevich	ru_RU
dc.contributor.author	Kondrashov Aleksey Gennadevich	ru_RU
dc.date.accessioned	2017-01-01T00:00:00Z	ru_RU
dc.date.available	2017-01-01T00:00:00Z	ru_RU
dc.date.issued	2017	ru_RU
dc.identifier.citation	Golovko A.N, Kondrashov A.G, Yurasov S.Yu., Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth//Procedia Engineering. - 2017. - Vol.206, Is.. - P.1333-1336.	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/eng/?p_id=169545&p_lang=2	ru_RU
dc.description.abstract	Procedia Engineering	ru_RU
dc.description.abstract	In connection with the absence of possibility to process gear-wheels with large allowance at machining of disk shavers (for example, after the preliminary rolling-up of points), N.V. Smorkalov et al. have worked out the construction of a worm type instrument with a continuous spiral cutting edge. The limitations of this construction were unfavorable terms of cutting wedge work for lack of the structurally executed rake which resulted in the subzero treatment productivity. For simplification of the procedure, regrinding of this instrument and minimization of the nascent “organic” error at regrinding on the outward cylindrical surface, a decision was made to bring in the instrument construction developed by N.V. Smorkalov et al. of positive rake γ, form a radius ditch and two antihunt ribbons breadthways l executed on an outward cylindrical surface.	ru_RU
dc.language.iso	ru	ru_RU
dc.subject	Worm type instrument	ru_RU
dc.subject	final machining	ru_RU
dc.subject	evolvent gear teeth	ru_RU
dc.title	Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth	ru_RU
dc.type	Articles in international journals and collections	ru_RU