KFU. Card publication. The Research of Stresses in the Molds of Injection Molding Machines

KAZAN
FEDERAL UNIVERSITY

- RUS
- 中文
- ES

THE RESEARCH OF STRESSES IN THE MOLDS OF INJECTION MOLDING MACHINES

Form of presentation

Articles in international journals and collections

Year of publication

2016

Язык

английский

Authors, employees of KFU

Mukhametzyanova Gulnara Fagimovna, author

Kharisov Lenar Rustamovich, author

Authors, students KFU

Yakovleva Dinara Maratovna, author

Bibliographic description in the original language

Yakovleva D.M, Mukhametzyanova G.F, Kharisov L.R., The Research of Stresses in the Molds of Injection Molding Machines//Procedia Engineering. - 2016. - Vol.150, Is.. - P.453-457.

Annotation

The article presents the analysis of casting molds failure under pressure. It was found that the main causes are physical and chemical activity of the casting alloy, the nature of the used materials and the intensity of the cyclic temperature-power loading. The technique of the stress assessment in the molds is presented. The schedule of distribution of axial and tangential stresses in the cross section of the sprue bushing in various stages of compression is made up. It is found that the maximum level of stress occurs at the contact surfaces during the filling and the subsequent brief exposure of the melt in the mold.

Keywords

injection molding; mold; stresses

The name of the journal

Procedia Engineering

URL

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84984822364&partnerID=40&md5=0d1bc39d9b257336e245853dcdf31cf4

Please use this ID to quote from or refer to the card

https://repository.kpfu.ru/eng/?p_id=139564&p_lang=2

Full metadata record

Field DC	Value	Language
dc.contributor.author	Mukhametzyanova Gulnara Fagimovna	ru_RU
dc.contributor.author	Kharisov Lenar Rustamovich	ru_RU
dc.contributor.author	Yakovleva Dinara Maratovna	ru_RU
dc.date.accessioned	2016-01-01T00:00:00Z	ru_RU
dc.date.available	2016-01-01T00:00:00Z	ru_RU
dc.date.issued	2016	ru_RU
dc.identifier.citation	Yakovleva D.M, Mukhametzyanova G.F, Kharisov L.R., The Research of Stresses in the Molds of Injection Molding Machines//Procedia Engineering. - 2016. - Vol.150, Is.. - P.453-457.	ru_RU
dc.identifier.uri	https://repository.kpfu.ru/eng/?p_id=139564&p_lang=2	ru_RU
dc.description.abstract	Procedia Engineering	ru_RU
dc.description.abstract	The article presents the analysis of casting molds failure under pressure. It was found that the main causes are physical and chemical activity of the casting alloy, the nature of the used materials and the intensity of the cyclic temperature-power loading. The technique of the stress assessment in the molds is presented. The schedule of distribution of axial and tangential stresses in the cross section of the sprue bushing in various stages of compression is made up. It is found that the maximum level of stress occurs at the contact surfaces during the filling and the subsequent brief exposure of the melt in the mold.	ru_RU
dc.language.iso	ru	ru_RU
dc.subject		ru_RU
dc.title	The Research of Stresses in the Molds of Injection Molding Machines	ru_RU
dc.type	Articles in international journals and collections	ru_RU