Refined equations and buckling modes under four-point bending loading of the sandwich test specimen with composite facing layers and a transversely flexible core

V.N. Paimushin∗ , M.V. Makarov∗∗

Kazan National Research Technical University named after A.N. Tupolev – KAI, Kazan, 420111 Russia

Kazan Federal University, Kazan, 420008 Russia

E-mail: ∗vpajmushin@mail.ru, ∗∗makarovmaksim@mail.ru

Received August 18, 2022

 

ORIGINAL ARTICLE

Full text PDF

DOI: 10.26907/2541-7746.2022.4.329-356

For citation: Paimushin V.N., Makarov M.V. Refined equations and buckling modes under four-point bending loading of the sandwich test specimen with composite facing layers and a transversely flexible core. Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, 2022, vol. 164, no. 4, pp. 329–356. doi: 10.26907/2541-7746.2022.4.329-356. (In Russian)

 

Abstract

A refined geometrically nonlinear theory of sandwich plates and shells with a flexible soft core and composite facing layers having low shear and compressive stiffness was introduced. It is based on the refinement of the shear model of S.P. Timoshenko taking into account transverse compression, as well as on the use of simplified three-dimensional equations of the theory of elasticity for a transversely flexible core. By integrating the equations over the transverse coordinate to describe the stress-strain state of the core, two two-dimensional unknown functions were introduced, which are transverse shear stresses, constants by thickness. For describing the static deformation process with high variability of the parameters of the stress-strain state of the core, two variants of two-dimensional geometrically nonlinear equations were derived. In the first one, the geometric nonlinearity was considered in the standard approximation by retaining the terms containing only the membrane forces in the facing layers. In the second variant additional geometrically nonlinear terms of a higher order of smallness were kept. Using the compiled equations, a geometrically and physically nonlinear problem of four-point bending of the sandwich specimen was formulated with regard to the physically nonlinear relationship between the transverse shear stresses and the corresponding shear strains in the facing layers. A numerical method stemming from the finite sum method (integrating matrix method) was developed for its solution and post-buckling behavior of specimen was investigated. It was shown that when the specimens are tested, their failure can be caused by the transverse shear buckling mode of the facing layer near the loading roller.

Keywords: sandwich plates and shells, composite facing layers, transversely flexible core, physical and geometrical nonlinearity, sandwich specimen, four-point bending test, integrating matrices, shear buckling mode, continuation method by shear strain

Acknowledgments. This study was funded by the Russian Science Foundation (project no. 19-79-10018, construction of equations, numerical solution of the problem) and supported by the Kazan Federal University Strategic Academic Leadership Program (PRIORITY-2030, three-point bending tests).

References

  1. Budiansky B., Fleck N.A. Compressive failure of fibre composites. J. Mech. Phys. Solids, 1993, vol. 41, no. 1, pp. 183–211. doi: 10.1016/0022-5096(93)90068-Q.
  2. Jumahat A., Soutis C., Jones F.R., Hodzic A. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Compos. Struct., 2010, vol. 92, no. 2, pp. 295–305. doi: 10.1016/j.compstruct.2009.08.010.
  3. Petras A., Sutclife M.P.F. Failure mode maps for honeycomb sandwich panels. Compos. Struct., 1999, vol. 44, no. 4, pp. 237–252. doi: 10.1016/S0263-8223(98)00123-8.
  4. Rupp P., Elsner P., Weidenmann Kay A. Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process. J. Sandwich Struct. Mater., 2019, vol. 21, no. 8, pp. 2654–2679. doi: 10.1177/10996362177220.
  5. Shi H., Liu W., Fang H. Damage characteristics analysis of GFRP-Balsa sandwich beams under four-point fatigue bending. Composites, Part A, 2018, vol. 109, pp. 564–577. doi: 10.1016/j.compositesa.2018.04.005.
  6. Sokolinsky V.S., Shen H., Vaikhanski L., Nutt S.R. Experimental and analytical study of nonlinear bending response of sandwich beams. Compos. Struct., 2003, vol. 60, no. 2, pp. 219–229. doi: 10.1016/S0263-8223(02)00293-3.
  7. Jiang B., Li Zh., Lu F. Failure mechanisms of sandwich beams subjected to three-point bending. Compos. Struct., 2015, vol. 133, pp. 739–745. doi: 10.1016/j.compstruct.2015.07.056.
  8. Fathi A., Woff-Fabris F., Altstädt V., Gätzi R. An investigation of the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options. J. Sandwich Struct. Mater., 2013, vol. 15, no. 5, pp. 487–508. doi: 10.1177/1099636213487004.
  9. Crupi V., Epasto G., Guglielmino E. Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam. Mar. Struct., 2013, vol. 30, pp. 74–96. doi: 10.1016/j.marstruc.2012.11.002.
  10. Shi H., Liu W., Fang H. Damage characteristics analysis of GFRP-Balsa sandwich beams under Four-point fatigue bending. Composites, Part A, 2018, vol. 109, pp. 564–577. doi: 10.1016/j.compositesa.2018.04.005.
  11. Alila F., Fajoui J., Gerard R., Casari P., Kchaou M., Jacquemin F. Viscoelastic behaviour investigation and new developed laboratory slamming test on foam core sandwich. J. Sandwich Struct. Mater., 2020, vol. 22, no. 6, pp. 2049–2074. doi: 10.1177/1099636218792729.
  12. Piovár S., Kormaníková E. Sandwich beam in four-point bending test: Experiment and numerical models. Adv. Mater. Res., 2014, vol. 969, pp. 316–319. doi: 10.4028/www.scientific.net/AMR.969.316.
  13. Russo A., Zuccarello B. Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels. Compos. Struct., 2007, vol. 81, no. 4, pp. 575–586. doi: 10.1016/j.compstruct.2006.10.007.
  14. Paimushin V.N., Tralakovskii D.V., Kholmogorov S.A. On non-classical buckling mode and failure of composite laminated specimens under the three-point bending. Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, 2016, vol. 158, no. 3, pp. 350–375. (In Russian)
  15. Paimushin V.N., Kholmogorov S.A., Makarov M.V., Tarlakovskii D.V., Lukaszewicz A. Mechanics of fiber composites: Forms of loss of stability and fracture of test specimens resulting from three-point bending tests. Z. Angew. Math. Mech., 2018, vol. 99, no. 1, art. e201800063, pp. 1–25. doi: 10.1002/zamm.201800063.
  16. Galimov N.K., Mushtari Kh.M. To the theory of sandwich plates and shells. In: Issledovaniya po teorii plastin i obolochek [Investigations for the Theory of Plates and Shells], 1964, no. 2, pp. 35–47. (In Russian)
  17. Goldenstein A.M., Mushtari Kh.M. To the derivation of nonlinear equilibrium equations of sandwich shallow shells with variable thickness. In: Issledovaniya po teorii plastin i obolochek [Investigations for the Theory of Plates and Shells], 1973, no. 10, pp. 327–332. (In Russian)
  18. Bolotin V.V., Novichkov Yu.N. Mekhanika mnogosloinykh konstruktsii [Mechanics of Sandwich Structures]. Moscow, Mashinostroenie, 1980. 375 p. (In Russian)
  19. Altenbach H., Eremeyev V.A., Naumenko K. On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer. Z. Angew. Math. Mech., 2015, vol. 95, no. 10, pp. 1004–1011. doi: 10.1002/zamm.201500069.
  20. Paimushin V.N., Makarov M.V., Badriev I.B., Kholmogorov S.A. Geometrically nonlinear strain and buckling analysis of sandwich plates and shells reinforced on their edge. In: Shell Structures: Theory and Applications. Vol. 4. London, CRC Press, 2017, pp. 267–270. doi: 10.1201/9781315166605-59.
  21. Badriev I.B., Makarov M.V., Paimushin V.N. Solvability of physically and geometrically nonlinear problem of the theory of sandwich plates with transversally-soft core. Russ. Math., 2015, vol. 59, no. 10, pp. 57–60. doi: 10.3103/S1066369X15100072.
  22. Paimushin V.N. Generalized Reissner variational principle in nonlinear mechanics of three-dimensional composite solids with applications to the theory of multilayer shells. Mech. Solids., 1987, vol. 22, no. 2, pp. 166–174.
  23. Dautov R.Z., Paimushin V.N. On the method of integrating matrices for the solution of boundary value problems for fourth-order ordinary equations. Russ. Math., 1996, vol. 40, no. 10, pp. 11–23.
  24. Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A. On the specifics of behavior of the sandwich plate composite facing layers under local loading. Vestn. Permsk. Nats. Issled. Politekh. Univ. Mekh., 2020, vol. 4, pp. 152–164. doi: 10.15593/perm.mech/2020.4.13. (In Russian)
  25. Paimushin V.N., Zakirov I.M., Lukankin S.A., Zakirov I.I., Kholmogorov S.A. Average elastic and strength characteristics of a honeycomb core and a theoretical-experimental method of their determination. Mech. Compos. Mater., 2012, vol. 48, no. 5, pp. 511–524. doi: 10.1007/s11029-012-9296-0.

 

The content is available under the license Creative Commons Attribution 4.0 License.